Sensor A5S1DD3-n for detection of rotational speed and direction of rotation in Hazardous Areas Zone 2 and highest safety requirements up to SIL3
To meet the specific requirements of hazardous areas (Ex Zone 2), we provide these specialized types which are certified for ATEX, UKEX, IECEx, as well as for other international standards such as UL/CSA and EAC (the Eurasian Customs Union with Russia, Kazakhstan, and Belarus).
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.
Sensor A5S1DD3-n for detection of rotational speed and direction of rotation in Hazardous Areas Zone 2
- Contact-free, wear-free, maintenance-free
- Unsusceptible versus external magnetic stray fields and machine vibration
- Suitable for all applications where high levels of accuracy and reliability are at a premium
- Frequency range 0 Hz…25 kHz
- Dual Channel, 1 track = rotational speed as frequency, 1 track = F/R status as binary signal
- TÜV certified for safety level SIL3 / IEC 61508:2010
- TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
- TÜV certified for SILCL3 / IEC 62061:2015
- Requires Isolating Barrier D461
- For installation in Hazardous Areas as intrinsically safe operating resource
- ATEX, UKEX, IECEx certified for Ex ia IIC T4/T6 Ga
- QPS / QPSus certified for Class I, Div 1, Groups A, B, C, D according to UL and CSA standards
- EAC certified for Ex ia IIC T4/T6 Ga
Download the latest Brochure
The BRAUN Differential-Hall-Effect based Sensors A5S
♦ Contact-free with a large air gap, so the potential for damage is eliminated
♦ Wear-free due to its unique design principle
♦ Maintenance-free during Lifetime, therefore minimized TCO
♦ Unsusceptible versus external magnetic stray fields and machine vibration
♦ Operates down to zero speed
♦ Cannot be damaged by faulty wiring
♦ Almost every target profile can be used
♦ A5S1 Sensors do not influence each other, no mounting distance in between is required
